Puppy Linux '.PET'?
Moderator: ScummVM Team
- Who'sThere
- Posts: 46
- Joined: Wed Dec 31, 2008 12:18 am
Puppy Linux '.PET'?
Hi. I was hoping someone here would know how to compile the Linux source into a 'pet' installer for the Puppy distros.
Or is it simply a matter of the way the files are packaged?
Or is it simply a matter of the way the files are packaged?
Apparently you need to compile in the same way as on any other Linux distro and then package it using the PET tools.
There is more info on http://www.puppylinux.com/development/createpet.htm
There is more info on http://www.puppylinux.com/development/createpet.htm
- Who'sThere
- Posts: 46
- Joined: Wed Dec 31, 2008 12:18 am
So there are no generic Linux binaries I could use with the PET tools to make an installer?
Unfortunately, I'm in no way qualified to compile stuff.
Thanks for the linkz though.
Unfortunately, I'm in no way qualified to compile stuff.
Thanks for the linkz though.
Last edited by Who'sThere on Fri Apr 23, 2010 12:50 pm, edited 2 times in total.
- MeddlingMonk
- Posts: 221
- Joined: Wed Jan 21, 2009 10:06 pm
It's actually pretty easy to compile in Linux. The readme tells you what libraries you need. And you need the basic build tools, but getting those is no different from installing any software for your distro, and you may already have all that anyway.
But creating an installer package, that's harder. Some time ago I looked at what I would have to do to make RPM packages for Fedora, and just walked away from the whole idea.
But creating an installer package, that's harder. Some time ago I looked at what I would have to do to make RPM packages for Fedora, and just walked away from the whole idea.
If the readme is not enough info for you, I have typed up compile instructions for Linux in this thread;
http://forums.scummvm.org/viewtopic.php?t=5507
http://forums.scummvm.org/viewtopic.php?t=5507
- Who'sThere
- Posts: 46
- Joined: Wed Dec 31, 2008 12:18 am
- MeddlingMonk
- Posts: 221
- Joined: Wed Jan 21, 2009 10:06 pm
You're on a dialup connection? Ouch! Then the problem isn't so much a lack of drivers as simply needing drivers. What you almost certainly have is a softmodem. That is, a modem with very little on-board hardware for doing it's own job, and so it relies on the computer's processor and memory and needs drivers to work.
There are hardware modems if you look around carefully enough. Check out xmodem.org and/or just google and you may find one.
There are hardware modems if you look around carefully enough. Check out xmodem.org and/or just google and you may find one.
- Who'sThere
- Posts: 46
- Joined: Wed Dec 31, 2008 12:18 am
Nope. It's one of those USB modems, but not a standard external one.You're on a dialup connection?
It's a cellular USB modem. The portable kind you can find through Verizon, AT&T, etc...
Basically, it is a cellphone without the phone components, with about the same performance as using your cellphone as a modem.
- Who'sThere
- Posts: 46
- Joined: Wed Dec 31, 2008 12:18 am
If you want a Puppy Linux distro purely for emulation, you should think about replacing it with "Puppy Arcade": http://scottjarvis.com/page105.htm
He used ScummVM 1.0.0 for this image, which can be found separately here: http://ppm.scottjarvis.com/
Plays Amiga (500, 1000, 2000), Apple (68k, 128k, 512k, SE, MacOS, Plus), Atari (ST, 800, 800XL, 130XE, 5200), Amstrad (CPC, Plus, VEB), Arcades, Colecovision, Commodore (64, 128, VIC20, PET), GameBoys (GB, GBC, GBA), GameGear, Genesis/MegaDrive, MasterSystem, MS DOS, N64, NeoGeo, NeoGeo CD, NES/Famicom, PC Engine/TurboGrafix, PSX, ScummVM, SNES and ZX Spectrum (16k, 48k, 128k, +2, +2A, +3) and more!
Minimum requirements will not play all emulators at full-speed.System requirements: Pentium 166mhz, 128MB RAM, CD-ROM drive.
Based on TurboPup Xtreme, Puppy 4.2, kernel 2.6.25.16
![Wink :wink:](./images/smilies/icon_wink.gif)
He used ScummVM 1.0.0 for this image, which can be found separately here: http://ppm.scottjarvis.com/
- Who'sThere
- Posts: 46
- Joined: Wed Dec 31, 2008 12:18 am