syntax to send multiple game folders to PS2HDD pfsshell-0.2a

Subforum for discussion and help with ScummVM's PlayStation 2 port

Moderator: ScummVM Team

Post Reply
morpheous
Banned
Posts: 14
Joined: Tue Jun 27, 2017 3:16 am

syntax to send multiple game folders to PS2HDD pfsshell-0.2a

Post by morpheous » Wed Jun 28, 2017 6:41 pm

What's the command to send multiple ScummVM game folders to my PS2hdd? I'm using CMD in admin mode.

MrPunchy
Posts: 127
Joined: Mon Nov 06, 2006 2:04 pm

Post by MrPunchy » Thu Jun 29, 2017 1:20 pm

Use Ulaunchelf, is a file explorer for ps2.

morpheous
Banned
Posts: 14
Joined: Tue Jun 27, 2017 3:16 am

Post by morpheous » Fri Jun 30, 2017 9:33 pm

Yeah, i am using UlaunchELF now. I was trying to avoid sending folders via the USB method, being its so slow. ^_^

I had no choice... I guess PFSSHELL isn't capable to send directory folders. :cry:

User avatar
UniqueUserName
Posts: 32
Joined: Mon Jan 30, 2012 2:27 am
Location: New England, USA

Post by UniqueUserName » Sat Jul 01, 2017 4:28 am

uLE (PS2-side) is not limited to USB...

Attach an Ethernet cable to your PS2HDDs Network Adaptor and use RadHostClient (PC-side) to import/export through uLEs "HOST:" option. :)

That should improve your speeds way more than just a few hundred percent. ;)

Enjoy!

morpheous
Banned
Posts: 14
Joined: Tue Jun 27, 2017 3:16 am

Post by morpheous » Sun Jul 02, 2017 12:23 am

PS2 network speeds are not much faster than USB 1.1 but i have no choice. :(

User avatar
UniqueUserName
Posts: 32
Joined: Mon Jan 30, 2012 2:27 am
Location: New England, USA

Post by UniqueUserName » Fri Jul 21, 2017 11:07 am

I dont know whom lied to you, but that just isnt correct at all... lmao!

USB = KBps
LAN = MBps

You may want to do a few tests lol.

morpheous
Banned
Posts: 14
Joined: Tue Jun 27, 2017 3:16 am

Post by morpheous » Fri Jul 21, 2017 6:17 pm

which HDL sever version do you use?

User avatar
UniqueUserName
Posts: 32
Joined: Mon Jan 30, 2012 2:27 am
Location: New England, USA

Post by UniqueUserName » Fri Aug 11, 2017 8:56 pm

None lol...
You cant use them for what were talking about anyways.

However, during testing, previously I have used...
HDL Dump Helper GUI ( v2.3-V2 )...
...and...
HDL Dumb/Dump ( v0.9.2 )...
...with...
PS2 IP: 192.168.0.10
...Good results.

To answer your question more directly and elaborate, I dont use any (unless you count anything internal to the homebrews Ive previously been discussing)...

If I were to transfer PS2-Games, I would directly-connect the Internal Hard Drive with my PC and average 48MBps with WinHIIP (PC-Side)...
If I were to transfer Non-PS2-Games (like weve been talking about), I would use the setup I previously posted in the thread were in...
Unique User Name wrote:uLE (PS2-side) is not limited to USB...

Attach an Ethernet cable to your PS2HDDs Network Adaptor and use RadHostClient (PC-side) to import/export through uLEs "HOST:" option. :)

That should improve your speeds way more than just a few hundred percent. ;)

Enjoy!
Keep in mind uLE can not-only see the contents of your PFS/APA (Not FAT32, nor NTFS) internal-PS2-drive format (which your PC cant view, let-alone alter), but it can transfer said contents in either direction...
...Quickly...
Test a PS1-sized-game for transfer comparisons in time/speed...
About 700MB sent through each transfer method (both USB and LAN) during testing should speak for itself (whether there is a big difference in speed/time)...
LAN wins by a landslide lol.

If I were to play PS2-Games, I would use OPL ( v0.9.3 )...
If I were to play Non-PS2-Games/Homebrew, I would use OPLv0.8 (if OPLv0.9.3 failed to boot it or play properly)...
The latter reason being, the age of most PS2-homebrew versus the PS2SDK most-likely used in that era.

Incidentally, I launch everything I have through OPL, always, except during testing.
It makes for a sweet Frontend (One-Stop UI) when launched directly into the APPS menu (with HDD/USB/ETH lists of games just a few left-clicks away).
;)

morpheous
Banned
Posts: 14
Joined: Tue Jun 27, 2017 3:16 am

Post by morpheous » Sat Jan 06, 2018 5:04 pm

UniqueUserName wrote:None lol...
You cant use them for what were talking about anyways.

However, during testing, previously I have used...
HDL Dump Helper GUI ( v2.3-V2 )...
...and...
HDL Dumb/Dump ( v0.9.2 )...
...with...
PS2 IP: 192.168.0.10
...Good results.

To answer your question more directly and elaborate, I dont use any (unless you count anything internal to the homebrews Ive previously been discussing)...

If I were to transfer PS2-Games, I would directly-connect the Internal Hard Drive with my PC and average 48MBps with WinHIIP (PC-Side)...
If I were to transfer Non-PS2-Games (like weve been talking about), I would use the setup I previously posted in the thread were in...
Unique User Name wrote:uLE (PS2-side) is not limited to USB...

Attach an Ethernet cable to your PS2HDDs Network Adaptor and use RadHostClient (PC-side) to import/export through uLEs "HOST:" option. :)

That should improve your speeds way more than just a few hundred percent. ;)

Enjoy!
Keep in mind uLE can not-only see the contents of your PFS/APA (Not FAT32, nor NTFS) internal-PS2-drive format (which your PC cant view, let-alone alter), but it can transfer said contents in either direction...
...Quickly...
Test a PS1-sized-game for transfer comparisons in time/speed...
About 700MB sent through each transfer method (both USB and LAN) during testing should speak for itself (whether there is a big difference in speed/time)...
LAN wins by a landslide lol.

If I were to play PS2-Games, I would use OPL ( v0.9.3 )...
If I were to play Non-PS2-Games/Homebrew, I would use OPLv0.8 (if OPLv0.9.3 failed to boot it or play properly)...
The latter reason being, the age of most PS2-homebrew versus the PS2SDK most-likely used in that era.

Incidentally, I launch everything I have through OPL, always, except during testing.
It makes for a sweet Frontend (One-Stop UI) when launched directly into the APPS menu (with HDD/USB/ETH lists of games just a few left-clicks away).
;)

morpheous
Banned
Posts: 14
Joined: Tue Jun 27, 2017 3:16 am

Post by morpheous » Sat Jan 06, 2018 8:40 pm

UniqueUserName wrote:None lol...
You cant use them for what were talking about anyways.

However, during testing, previously I have used...
HDL Dump Helper GUI ( v2.3-V2 )...
...and...
HDL Dumb/Dump ( v0.9.2 )...
...with...
PS2 IP: 192.168.0.10
...Good results.

To answer your question more directly and elaborate, I dont use any (unless you count anything internal to the homebrews Ive previously been discussing)...

If I were to transfer PS2-Games, I would directly-connect the Internal Hard Drive with my PC and average 48MBps with WinHIIP (PC-Side)...
If I were to transfer Non-PS2-Games (like weve been talking about), I would use the setup I previously posted in the thread were in...
Unique User Name wrote:uLE (PS2-side) is not limited to USB...

Attach an Ethernet cable to your PS2HDDs Network Adaptor and use RadHostClient (PC-side) to import/export through uLEs "HOST:" option. :)

That should improve your speeds way more than just a few hundred percent. ;)

Enjoy!
Keep in mind uLE can not-only see the contents of your PFS/APA (Not FAT32, nor NTFS) internal-PS2-drive format (which your PC cant view, let-alone alter), but it can transfer said contents in either direction...
...Quickly...
Test a PS1-sized-game for transfer comparisons in time/speed...
About 700MB sent through each transfer method (both USB and LAN) during testing should speak for itself (whether there is a big difference in speed/time)...
LAN wins by a landslide lol.

If I were to play PS2-Games, I would use OPL ( v0.9.3 )...
If I were to play Non-PS2-Games/Homebrew, I would use OPLv0.8 (if OPLv0.9.3 failed to boot it or play properly)...
The latter reason being, the age of most PS2-homebrew versus the PS2SDK most-likely used in that era.

Incidentally, I launch everything I have through OPL, always, except during testing.
It makes for a sweet Frontend (One-Stop UI) when launched directly into the APPS menu (with HDD/USB/ETH lists of games just a few left-clicks away).
;)
I tried to setup SCummvm to launch from the OPL APPS Tab awhile ago and wasn't successful. As a result, i just installed the scummvm.ELF in the boot folder and played it on my PS browser but i want to launch it from OPL.

Any ideas or perhaps you too, launch it from the PS2 browser?

User avatar
UniqueUserName
Posts: 32
Joined: Mon Jan 30, 2012 2:27 am
Location: New England, USA

Post by UniqueUserName » Sun Jan 07, 2018 12:04 pm

morpheous wrote:I tried to setup SCummvm to launch from the OPL APPS Tab awhile ago and wasn't successful. As a result, i just installed the scummvm.ELF in the boot folder and played it on my PS browser but i want to launch it from OPL.

Any ideas or perhaps you too, launch it from the PS2 browser?
You quoted the exact instructions, FOUR TIMES. :shock:

HERE:
UniqueUserName wrote:If I were to play Non-PS2-Games/Homebrew, I would use OPLv0.8 (if OPLv0.9.3 failed to boot it or play properly)...
The latter reason being, the age of most PS2-homebrew versus the PS2SDK most-likely used in that era.

Incidentally, I launch everything I have through OPL, always, except during testing.

Post Reply