cursor crawls - like bad calibration

Subforum for discussion and help with ScummVM's PocketPC/HandheldPC port

Moderator: ScummVM Team

Post Reply
carsonic
Posts: 1
Joined: Sun Aug 17, 2008 2:20 pm

cursor crawls - like bad calibration

Post by carsonic »

My problem is that the cursor cross gets further from the tip of my stylus as I move it further from the lower left corner. In that corner it seems OK, but the cursor is on the wall (so more than a cm difference from tip) when I reach the middle of the screen.
When not in Scumm, the calibration in WinCE is perfect everywhere.
Any suggestions what I could try?
I tried landscape=2 in [scummvm] sections but the inaccuracy is present in other modes.
MAK
Posts: 2
Joined: Sun Jul 12, 2009 7:47 pm

Post by MAK »

I have the sane problem with v0.13.0 on i900 Omnia when I tap the icon for the first time (rotate 90 degree). When I tap the icon for the second time (rotate 270 degree) everything is ok.

I suspect that it is a bug in ScummVM: it does not support the WQVGA devices (240x400). You can reproduce the problem using the Microsoft Windows Mobile Device Emulator if set that resolution.[/b]
fingolfin
Retired
Posts: 1452
Joined: Wed Sep 21, 2005 4:12 pm

Post by fingolfin »

If you think this is a bug in ScummVM, please file a bug report on our bug tracker about it; otherwise, the relevant devs won't become aware of it, which means they won't fix it :).
MAK
Posts: 2
Joined: Sun Jul 12, 2009 7:47 pm

Post by MAK »

Done: 2821082
Post Reply